ADITIONAL POCKET

Additional pocket for backplate ballast system or belt. Dimensions 18x15x4 cm

STREAM RING 20 WING STRIPE

Circular style wing for diving with doubles. STREAM RING 20 was designed for diving with double tanks from 2x7-2x12 and stage. Due to the small profile, along with sufficient lift, this wing is especially suitable for recreational and also tec diving.

BACK PLATE POCKET

Designed for placing a buoy or a lifting bag between the backplate and diver´s back. Stainless-steel screws for attaching the pocket to the backplate are included.

POCKET W/ CARABINERS & CUT SYSTEM

Small if not necessary, big when has to be. Big Cordura 1000multi-compartments pocket to fasten to Side Mount back, thanks two double ended stainless steel snap links. Made to keep a low profile when empty, the pocket is furnished with scissors.

BACKPLATE WEIGHT POCKET 4.5 KG (Pair)

Ballast system for back plate, consisting of two pockets that are attached to a webbing and end in a riveted ring, which is attached to the holes of the back plate. The left pocket includes a D-ring for attaching a pressure gauge or monitoring device.

TRIESTE WING 94 LB TWIN

The Trieste Double Bladder Wings are designed for the diver that prefers a wing with a redundant bladder. The secondary bladder is designed to ensure proper buoyancy control in the event of primary bladder failure. Horseshoe style, redundant wings are the choice wing picked by divers that are not wearing a drysuit. The redundant bladder is utilized in the rare event that the primary bladder is rendered unusable. The power/oral inflator is the same on both bladders. Overpressure valves are located on the respective sides of each bladder.

WEIGHT POCKET FOR BACK PLATE (Pair)

Ballast system consists of 2 pockets, which are slipped on a waist strap and fastened to a backplate (pair of bolts and nuts included). Left pocket has a D-ring for mounting a pressure gauge. Inside each pocket is an inner pocket with a handle for inserting the weights.

PERFORMANCE WING 32 LB SINGLE

The Performance Mono Wing is a donut-style wing allowing quick and easy movement of air from one side of the air cell to the other. It also has stabilizing bars built into the wing to reduce tank shifting during the dive. This is the ideal wing for the traveling diver as it is small, lightweight and easy to pack. The Mono wing will fit onto the IQ pac, Aluminum or Stainless Steel Backplate using the Comfort harness II or Continuous weave (Dir) harness.

TRIM POCKETS FOR BACKPLATE

Small pockets for attachment to the backplate. Each pocket can carry one piece of weight block (dimensions 8x10x3 cm, 1,5-2 kg). Price is for 1 pair (2 pieces).

PERFORMANCE WING 45 LB DOUBLE

The Performance Double Wing is a donut-style wing allowing quick and easy movement of air from one side of the air cell to the other and is designed specifically for use with double tanks. Donut configuration allows air to travel from one side of the air cell to the other easily, this reduces the possibility of air trapping on one side of the wing.

TRIM POCKET 2 KG (Unit)

Small pocket for attachment to the strap exactly where you need it. It can carry one piece of weight block (dimensions 8x10x3 cm, 1,5-2 kg). Price is for 1 piece.

TRIESTE WING 60 LB TWIN

The Trieste Double Bladder Wings are designed for the diver that prefers a wing with a redundant bladder. The secondary bladder is designed to ensure proper buoyancy control in the event of primary bladder failure. Horseshoe style, redundant wings are the choice wing picked by divers that are not wearing a drysuit. The redundant bladder is utilized in the rare event that the primary bladder is rendered unusable. The power/oral inflator is the same on both bladders. Overpressure valves are located on the respective sides of each bladder.

TANK STRAP S.S. BUCKLE

Indestructible buckle, HDPE pad, protecting the bottle from scratching, strap made from non-elongation material. Stitched on a strip of antislip rubber.

WTX-D18 WING 8 L

The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver

TOOTHED STOPER S.S. 50 MM

Toothed stainless steel stopper that functions as a retainer on any nylon webbing. Ideal for the assembly of harnesses in technical diving. Also serves as a retainer for lead pads on belts with nylon webbing, being much more resistant than traditional plastic retainers.

WTX-D30 WING 15 L

The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver

SMOOTH STOPER ALUMIIUM BLACK 50 MM

Smooth aluminium stopper that functions as a retainer on any nylon webbing. Ideal for the assembly of harnesses in technical diving. Also serves as a retainer for lead pads on belts with nylon webbing, being much more resistant than traditional plastic retainers.

D RING + TOOTHED STOPPER 90 DEGREES S.S.

90 degree d-ring stopper in stainless steel. The rigid assembly facilitates insertion and attachment of carabiners, hitch accessories, harnesses, or belts. This 90 degree angle piece is suitable for shoulder harnesses in Tec diving.

ELASTIC CORD - BUNGEE 6 MM (200 M REEL)

tds elastic cord bungee 6 mm by meters:Elastic cord - bungee type 6 mm thick for many uses both in technical diving, as recreational: 2nd stage hang neck, fastening computers, tanks, sidemount ... etc. Color Black. Sold by 200 m reel